Your Guide to Drain Pipes

Drain pipes, they’re everywhere. From homes to offices to your favorite restaurant or bar, they’re going to be there. But most homeowners don’t actually know much about them, except the very basic statement: well, they’re pipes. As drain pipe experts, we’re here to tell you there’s much more to it than that!

What is a pipe?

Anytime you use water, either for washing dishes, showering or washing your hands, the pipe is the main passageway the water goes through. Pipes also drain your home of any unwanted or used water, so they are a necessity for any house to have running water.

What can go wrong with pipes?

A lot of things can go wrong with pipes. Many of the issues start with the installation, as they can sometimes be installed incorrectly and this causes major problems over time. These problems can include significant leaking due to loose nuts or bad soldering or sealing amongst other things. If you are having some problems with your pipes, the bad installation might be a likely culprit.
Incorrect installation of your pipes means that there are other issues that can occur. One of the most common problems is plugging, which is caused by a variety of reasons. One of the main reasons is mineral deposits or buildups, foreign objects, grime or due to everyday use. If this is the case, cleaning them thoroughly can easily solve the problem. Another common mishap is leaking, which can be caused by loose nuts, wear and tear, high water pressure, insufficient sealing or holes. If your pipes are leaking, the best course of action is to contact a professional plumber to inspect your pipes and fix any problems. A small leak can turn into a big flood, and you don’t want this to happen, as your house may sustain severe damage from the flooding.
Pipes naturally erode or corrode over time, so you want to make sure your pipes are replaced before this happens. Plumbers recommend that you have a professional check your pipes at least every once a few years. Take note of how they are holding up, and how old your pipes are. This will give you a guide to determine the lifespan of your tubes.
How to prevent your water pipes from clogging
You probably don’t consider how water enters and exits your home, so you might place a considerable strain on your water system without taking into account how it will affect the pipes. This can include flushing down hairs or food particles or running faucets at high pressure and hot temperatures.
How to keep your drain pipes in good shape
As excess pressure takes its toll, that’s when problems with your pipes start occurring. Most homeowners only start to consider water pressure in relation on how it affects heating costs and water bills. You might assume that your pipes can bear any amount of pressure, but this isn’t the case.
Keep water pressure at appropriate levels
Beware of high mineral content in level: hard water is a threat to your plumbing system, as the minerals accumulate and hamper the flow of water. If you live in a state with hard water, think about investing in a water softener.
Don’t DIY drain repairs
It’s vital that you know the basics of home sewer maintenance, but at some point, your pipes will break down, and they will need to be repaired or replaced. It’s important that you schedule routine drain maintenance and call a professional when a problem starts to occur.

The post Your Guide to Drain Pipes appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/12/26/guide-drain-pipes/
via http://trophy-ac.com

Air Conditioner Tune Ups Helotes, Tx

Trophy-ac local multiples:

Air Conditioning Tune Ups & Maintenance

Are your electric bills too high? Is your AC not cooling your house like it used to? Maybe it’s time for an Air Conditioning tune up. At Trophy AC, we can make your air conditioner perform like it’s brand new. Not only can having annual air conditioning maintenance put the life back into your old AC unit, but it can also help to reduce those high electric bills. A neglected air conditioner loses almost 5% efficiency every year. If your air conditioning unit hasn’t had a professional maintenance check for five years or more, you could be operating your AC system at 75% or less efficiency.

Here at Trophy AC, all of our professional and skilled technicians have had years of experience when it comes to air conditioning tune ups. Over the years, we have worked with many different types and brands of AC units – there’s not much that we don’t know about air conditioners. We understand how important it is for homeowners to have a fully functioning unit, so we can promise you that with our annual check-ups, your AC will always be fit and ready to perform. Not only do our maintenance checks help to discover any problems, but they can also prolong the life of your air conditioning system.

Professional HVAC Maintenance and Tune ups

Neglecting your AC unit can lead to poor performance and an increase in your energy consumption. If one component isn’t performing correctly and it goes unnoticed or ignored, it can cause damage to other parts of your unit. Not only could you be paying more in energy costs, but you could also end up forking out for costly repairs or, worst case scenario, needing an entirely new AC installation.

Yearly air conditioning maintenance is far less expensive than a typical unit repair or replacement. An air conditioning tune ups can keep your AC unit performing at peak performance and will offset your costs by lower HVAC Maintenance bills and savings on your electric bill.

Complete AC Tune Up

At Trophy AC in Helotes, Tx, we offer substantial savings on our immeasurable AC tune up. You can rely on us to carry out the air conditioning tune ups with great professionalism and also to the highest possible standard. When you choose us to service your air conditioner, one of our certified technicians will come to your home and thoroughly check your air conditioning unit.

Our AC tune-ups always include the following:

• Check refrigerant level
• Check compressor
• Tighten all electrical connections
• Check relay fan

• Evaluate condenser coil
• Check evaporator fan motor
• Check temperature drop at coil
• Check breakers

• Check plenums
• Conduct energy evaluation of system
• Check wiring

• Check disconnect box
• Check t-stat for proper calibration
• Clean or replace filter

Helotes, Tx HVAC Company

Temperatures during the summer months in Helotes, Tx often flirt with the 100-degree mark on a regular basis. Your air conditioner works hard to cool your home to the temperature set on the thermometer. If you’re guilty of neglecting your air conditioner, you’ll be unaware if it has any problems. If there’s a component that isn’t working correctly, your AC could fail on you at any moment. The last thing you want is for your unit to malfunction when you need it the most.

To avoid encountering any AC troubles during the summer months, schedule a air conditioning maintenance check today. Call the best Helotes, Tx HVAC repair company and ensure your Air Conditioning unit will function properly during the hot days in Helotes, Tx. You won’t only save money on your electric bills; you’ll also have a unit that performs to its full potential. You can also save money now by using one of our AC Tune Up coupons. Find out why your neighbors are using Trophy AC by calling us today at 210-465-7283.

Helotes, Tx

Texas

The post Air Conditioner Tune Ups Helotes, Tx appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/12/05/air-conditioner-tune-ups-helotes-tx/
via http://trophy-ac.com

4 Things that Can Go Wrong with Your AC

It can be difficult to detect when you are having problems with your heating and air conditioning system (HVAC). Some common problems, if left unattended, can damage your system, increase your utility bills and cause poor indoor air quality. Any time one of the following problem presents itself, make sure to have your HVAC system repaired by a professional, to avoid it breaking down or needing to be replaced.
1. A Dirty AC Filter
The air filter in your HVAC system will eventually become clogged with dirt, dust, mold and other pollutants. When the filter is clogged, your system needs to work harder, expending more energy and reducing its lifespan. A dirty filter also spreads contaminants around your home and the other parts of your HVAC system.
It’s essential to check your filter monthly by holding it up to the light. If no light passes through the filter, it needs to be changed. To keep your HVAC unit working correctly, you must change your air filter every three months and make sure that nothing is blocking your air registers, such as curtains or furniture.
2. Low Refrigerant
The refrigerant in your HVAC unit absorbs outside air heat during the winter, and gives off heat in the summer, warming and cooling your home as needed. If your AC is not cooling your home properly and you notice an increase in your utility bills, the culprit can be low refrigerant caused by poor installation or a leak.
A wet area around the connections of the hose or oily streaks around your compressor are possible signs of a leak. A lot of older HVAC units leak some refrigerant every year, so regularly replacing this refrigerant should be part of its maintenance. If you find that your coolant needs to be recharged more than once per year, an AC technician needs to repair the leak in your unit.
3. Problems With the Thermostat
Your thermostat won’t work properly and get an accurate measure of the temperature of your home if it’s close to your oven, next to a draft or on a warm sunny wall so make sure to avoid these placement areas. The components in your thermostat can also be dirty from dust, causing your AC unit to work overtime and waste energy.

If your thermostat is not working at all, most likely this is due to a wiring issue, or a battery issue if you have a wireless model. Check that your unit is turned on, the batteries are working, and it’s correctly set for the season.
4. Ductwork That’s Leaky or Dirty
Dirt, must, dust and other contaminants will start to accumulate inside your ducts, lowering your HVAC units efficiency. Other things that can lead to lower indoor quality and higher energy bills are gaps, leaks or poorly installed ductwork. Some of the indicators of a leak are whistling, buzzing or flapping wings noises.
To ensure that you have clean ducts, open the air register and wipe the inside with a damp cloth. If any pest droppings, cobwebs, mold or dirt remains in the fabric, then your ductwork needs to be professionally cleaned. An HVAC professional will also register and fix any leaks, so your unit runs at its optimal conditions.

The post 4 Things that Can Go Wrong with Your AC appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/11/02/4-things-can-go-wrong-ac-2/
via http://trophy-ac.com

Air Conditioning Services San Antonio

Tune up and your AC service

The hard working appliance that helps you to defeat heat is your Air conditioner. It comes with a number of moveable parts and it can generate the immense amount of heat. This appliance has an indoor part and an outdoor part due to which it is exposed to many different elements like dust and dirt in the air; also it requires much wear and tear maintenance. If you just look briefly into the mechanism of your air conditioner you will come to realize that in order to get it work more efficiently and effectively it has to get maintenance tune-ups on regular basis especially before summers ,the spring tune ups
So we reach the main point that regular tune ups are required to keep away the dust and dirt from your AC to make it work effectively and efficiently. But, how it can be done is still a question. The most effective system can only be achieved by having a most effective and efficient AC filters. The description of which is described below.
Clean filters; keeping the filters of your AC clean is the most vital part of AC maintenance. It can help you in saving both time money and energy. It will save up your maintenance cost. Most importantly a clean filter provides a clean environment by refining the air quality of your room.
Replacing your AC filters three to four times per year is very vital during the time of high usage. Always prefer to buy the one which provides the maximum benefit, otherwise, you will end up replacing it again and again for different reasons and requirements. There are many different types of filters available in the market. Some of them are
1. Filters with disposable fiberglass; these filters are the least expensive which makes it comes with the least benefits and effectiveness. It is only designed to help to block the large particles and small particles can very easily pass through it.
2. Filters with washable electrostatic; As the name explains these filters comes with the static charge that has the ability to attract the dust particles and may other matters. These are not so cheap and are comparatively more effective than disposable ones, but still, it also lacks the ability to stop small dust particles.
3. Filters with plated allergy; this is designed to trap big allergens similar to pollens and molds which are done through a dense and networked material.
4. Electrical air cleaners; removing the pollutant particles by magnetizing it in an ionized electrical field is done only by electrical cleaners. It has the ability to remove or trap all the pollens and spores of molds for up to 90% to 95% and also it helps in removing airborne viruses for more than 80%
5. HEPA furnace filters; these filters are the most effective and the most efficient thus they are mostly used for commercial purposes. It is designed to clean all small and large particles providing the cleanest and effective system.

Tune-ups for your Air Conditioner

It is highly recommended to get the inspection of your AC each season to prevent and maintain it from different problems that can affect its working; it will help in making your system run throughout the year.
AC tune-ups include number of services like;
• To get the peak level of efficiency it is important to make the inspection of you air conditioner’s coolant level and its pressure.
• For the improvement of comfort and to get maximized control it is important to check for ideal temperature and cycles and to calibrate the thermostats.
• To control the wear and tear cost it is important to make inspections of wirings, capacitors, and contacts.
• Keeping the elevator coil clean is very important
• The drain of Condensate should be clear and clean
• Air Conditioner’s condenser should be clean
• Inspection of outdoor disconnect is necessary
• Lubrication of condenser’s fan motor, blades and other parts is must
• The amplifiers of compressors should be checked
• Safety checks should be performed on regular basis.

Maintenance of your Air Conditioner

Timely and regular maintenance of your air conditioners can save you a lot of time and energy by improving the system’s performance and reducing the cost of energy. As it improves and maintains the system’s parts it increases the life of your AC and its equipment’s. Costly and expensive breakdowns are also prevented by regular maintenance.
Small maintenance can be performed at home as well no professional are require every time to make small adjustments. Here are something’s that you can at your home
1. Make sure you have turned off or have disconnected the electricity to your AC before initiating any task
2. Also, try to keep the outdoor unit clean from dust and leaves
3. A garden hose can be best utilized to clean the compressor but make sure to turn off the electricity first.
4. Most importantly as mentioned above change your AC’s filters on regular basis. Mostly do it every month during the season of high usage to keep your air conditioners working efficiently and effectively
5. Make inspection of your fan belt tension
6. To get the accurate and precise measurements try to keep your AC’s thermostat away from the sources of heat.
7. Try to keep the temperature of your thermostat as high as possible because for every 1 Degree increase in thermostat can save the cost of energy by 3%
8. Try to keep the windows and drapes of your house closed during the day time when the sun is out to keep your house naturally cool
9. Placing barriers around your AC is very important. Placing a fence around your AC is the best option. Many people prefer to place bushes around it but it leads to reduced airflow. The fence will prevent stray animals especially dogs to stay away from it. Dogs often urinate around the AC’s outdoor; its urination is acidic in nature and can very adversely affect your air conditioner’s equipment. Bushes can also work but then they have to be placed at least 20 to 30 inches away from your unit.

The post Air Conditioning Services San Antonio appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/10/04/391/
via http://trophy-ac.com

How Air Conditioning Improves Your Quality of Life

As the number of people that have asthma or allergies has risen in the past few years, so has the discussion of the importance of making improvements to indoor air quality. Indoor air quality focuses not just on making sure your AC unit runs smoothly and operates at full capacity, but also on making sure your health is not at risk. Using an AC means that your indoor air quality is improved, and in turn your qualify of life as well.

Better Air Quality – Better Breathing

When your body is not inhaling contaminated air, it is easier to breathe and you feel better. For you to stay alive, your body needs to receive the appropriate oxygen. When the indoor air quality in your home or office is at its best, the need for doctors and hospital visits, as well as multiple sick days, will be diminished. When your environment has the right amount of moisture in the air, you will also be able to breathe easier, as you are not breathing in dry air.

Enjoy the Indoors

You always want to be comfortable in your environment, especially in your home or office. Unfortunately, having a poor indoor air quality makes your office or home life uncomfortable. It’s important that you walk into your home or office and not feel sick or that your breathing capacity is diminished. When you improve your indoor air quality with an air conditioner, it makes a huge difference in your comfort levels.

Less Allergies

If something in your home is making you have allergic reactions, but you’ve ruled out almost all the possibilities, making a change to your indoor air quality with an AC can be the solution you’ve been looking for. AC units remove a surprising amount of allergens from your home, including pollen, mold, pet hair, and other allergens that can cause you trouble. When you take the step of installing an AC unit in your home, this will substantially increase your indoor air quality by removing the allergens.

How Does an AC Improve Air Quality?

All AC units contain filters that remove pollutants and allergens by trapping them and therefore improving the air that circulates in your home.
However, this dust, dirt, and mold can build up inside your filters and AC unit, so the filters need to be regularly maintained. Otherwise, your air quality will be reduced.
To improve the air quality in your home, follow these steps:

1. Choose an AC unit that suits your homes individual needs: Make sure that you are purchasing your unit that fills both your AC and heating requirements. It’s also recommended that you get the expertise of an AC technician to discover your home’s specific needs, so you keep your home cool and your energy bills low.

2. Clean your filters: You should clean your AC filters yearly, to ensure any dust, dirt or mold buildup is removed.

3. Replace your filters: Your manufacturer’s guide should tell you how often your filters should be replaced; it’s usually around every three years.

The post How Air Conditioning Improves Your Quality of Life appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/08/29/air-conditioning-improves-quality-life-2/
via http://trophy-ac.com

Prevent Damage to your Air Conditioner with Maintenance

There are always going to be some frustrating times when your air conditioner requires repair and knowing that you could have averted the problem will double the frustration. Hence in this article, we stress the idea of keeping your air conditioner in a tidy and well-maintained condition in order to minimize any future cost of repair.

Following are some common damages that occur in air conditioning units if they are handled with negligence and proper care is not made available for them.

1. Freezing of Evaporator Coils
One of the most common yet concerning problems that occur in an air conditioner is freezing in the evaporator coils. Even though freezing sounds as something super fantastic for an air conditioner it actually is not.
It is normal for the air conditioner to move hot air out of the house in order to pump in the cool air and it tends to decrease the temperature of a coil responsible for cooling the air. However, the problem occurs when the coils get cool to the extent that it starts freezing. A frozen coil will stop removing heat from the air and thus the performance of the air conditioner will definitely be harmed.
This issue can easily be resolved if you take proper care of your AC unit and keep constant checks regarding its maintenance. Glitches in the fan motor, lower levels of refrigerant and a muggy air filter are possible reasons for this problem.

2. Water Leaks
Air conditioners can sometimes cause some really disastrous water leaks which can damage many important parts of your house depending upon the placement of the indoor unit. So next time you see a water leak somewhere in the house stay alert as it is possible that it is not your common plumbing leak but a potential air conditioner problem.
Drainage is a routine task for an air conditioner, it carries the moisture that condensates on the inner coil to outdoors through a drainpipe. However, if there is some obstruction in the drain which does not allow it free passage to move the moisture outside then it is bound to leak. Just keep the drain clean to avoid this problem.

3. Untimely Wear and Tear
No air conditioner can work forever. With time they will require their share of attention. However, if you don’t maintain your air conditioner properly it is bound to develop problems earlier than expected.
If you calculate the expense of maintenance to the possible expense of repairs that your air conditioner can cost you without maintenance then you will find that maintenance at proper intervals is way cheaper and cost-effective.

In the End
Most of the problems that happen with our air conditioner should not require repair but only a maintenance inspection from a professional team of air conditioning repairers that can get rid of potential threats which may mar the performance of your air conditioner in the future and save you from expensive repair costs.

The post Prevent Damage to your Air Conditioner with Maintenance appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/07/30/prevent-damage-air-conditioner-maintenance/
via http://trophy-ac.com

4 Things that Can Go Wrong with Your AC

It can be difficult to detect when you are having problems with your heating and air conditioning system (HVAC). Some common problems, if left unattended, can damage your system, increase your utility bills and cause poor indoor air quality. Any time one of the following problem presents itself, make sure to have your HVAC system repaired by a professional, to avoid it breaking down or needing to be replaced.

1. A Dirty AC Filter

The air filter in your HVAC system will eventually become clogged with dirt, dust, mold and other pollutants. When the filter is clogged, your system needs to work harder, expending more energy and reducing its lifespan. A dirty filter also spreads contaminants around your home and the other parts of your HVAC system.
It’s essential to check your filter monthly by holding it up to the light. If no light passes through the filter, it needs to be changed. To keep your HVAC unit working correctly, you must change your air filter every three months and make sure that nothing is blocking your air registers, such as curtains or furniture.

2. Low Refrigerant

The refrigerant in your HVAC unit absorbs outside air heat during the winter, and gives off heat in the summer, warming and cooling your home as needed. If your AC is not cooling your home properly and you notice an increase in your utility bills, the culprit can be low refrigerant caused by poor installation or a leak.
A wet area around the connections of the hose or oily streaks around your compressor are possible signs of a leak. A lot of older HVAC units leak some refrigerant every year, so regularly replacing this refrigerant should be part of its maintenance. If you find that your coolant needs to be recharged more than once per year, an AC technician needs to repair the leak in your unit.

3. Problems With the Thermostat

Your thermostat won’t work properly and get an accurate measure of the temperature of your home if it’s close to your oven, next to a draft or on a warm sunny wall so make sure to avoid these placement areas. The components in your thermostat can also be dirty from dust, causing your AC unit to work overtime and waste energy.

If your thermostat is not working at all, most likely this is due to a wiring issue, or a battery issue if you have a wireless model. Check that your unit is turned on, the batteries are working, and it’s correctly set for the season.

4. Ductwork That’s Leaky or Dirty

Dirt, must, dust and other contaminants will start to accumulate inside your ducts, lowering your HVAC units efficiency. Other things that can lead to lower indoor quality and higher energy bills are gaps, leaks or poorly installed ductwork. Some of the indicators of a leak are whistling, buzzing or flapping wings noises.
To ensure that you have clean ducts, open the air register and wipe the inside with a damp cloth. If any pest droppings, cobwebs, mold or dirt remains in the fabric, then your ductwork needs to be professionally cleaned. An HVAC professional will also register and fix any leaks, so your unit runs at its optimal conditions.

The post 4 Things that Can Go Wrong with Your AC appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/06/30/4-things-can-go-wrong-ac-2/
via http://trophy-ac.com

Air Conditioning Tune Ups

With summer on the way, it’s time to make sure your air conditioner is in top shape. Neglecting it could mean your high summer electricity bills will be even higher than necessary. Here are the steps you need to take to make sure you spend as little as possible on summer air conditioning.

Put in fresh filters

Minimal air conditioner use during the winter might have meant you got out of the habit of regularly changing your air filter. Start the air conditioning season with a brand new air filter to ensure maximum air flow. If your filter is clogged, it’s making your air conditioner run longer and use more energy. Write down the date your filter needs to be replaced, and strictly follow the replacement schedule until the end of air conditioning season.

Take care of your outdoor condenser unit

Falling leaves and other winter debris have likely accumulated on or around your condenser during the winter. With the power disconnected to ensure the fan doesn’t suddenly turn on and injure you, be sure all of this debris is cleared away. Trim any surrounding bushes or plants to make sure your AC condenser has a couple of feet of breathing room. If you have no plants around it, planting bushes nearby can help provide shade that will keep it cool and running more efficiently.

Make sure your AC’s vents aren’t blocked

If you have ceiling vents, this will be easy, but make sure no hanging decorations or large furniture are blocking your air flow. For floor or window vents, be sure you haven’t moved any furniture or other items in front of them. In addition to making sure the space directly in front of the vent is clear, you’ll also need to make sure there is nothing blocking the air from circulating around the room. Also make sure your vents are clean — dirty vents are no better than vents with a couch blocking them.

Install a programmable thermostat

Turning the temperature up by five degrees while you’re at work during the day could cut your electricity use by 5 percent. You can try doing this by hand, but there will be many days where you forget to turn up the temperature before you leave or come home to a miserably hot house. A programmable thermostat will make the adjustments for you to save energy during the day and make sure your home is comfortable when you return.

Schedule an AC tune-up

An annual AC tune-up can help restore your air conditioner to peak performance. Much like going without oil changes or maintenance over time, not maintaining your AC regularly reduces its performance. When your air conditioner works hard to keep you cool, parts inevitably need to be realigned or cleaned. Each small problem can add several percent to your electricity bill if not corrected. Regular air conditioning tune-ups can also prolong your AC’s life and reduce repairs by detecting small problems before they turn into big ones.

Call Trophy-AC in San Antonio to schedule an AC tune-up and check out our money saving coupons to get the best deal possible on your air conditioning repair and tune-up. Call today at 210-393-9617.

The post Air Conditioning Tune Ups appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/06/28/air-conditioning-tune-ups/
via http://trophy-ac.com

How to Prepare Your AC for the Summer

How to Prepare Your AC for the Summer
Your home’s energy bills are largely dependent on the consumption of energy from your boiler or furnace system, and especially on how efficiently your AC unit is running. A unit that is operating at its best efficiency can decrease your energy bill by as much as 20 percent, while a unit that has not been properly maintained will increase your energy bills substantially.
When you haven’t been using your AC, it will collect debris and leaves, so it needs a bit of maintenance to get running properly. It’s vital that you perform this maintenance before summer arrives, so you can make sure your AC is in great shape to keep you cool during the summer months and save you money in energy bills.
There are five basic steps to get your unit ready for performing at its best:
1. Change or Clean the Filter Monthly
Your AC might have disposable filters, or its filters might be able to be cleansed with water. No matter the type of filter your unit has, your priority needs to be cleaning the filters. When your filters are dusty or dirty, your AC system needs to function more to deliver cold air into your home.
2. Clean the Outdoor Unit
Your outdoor unit is also known as a condenser, and it shouldn’t have anything obstructing the equipment. Any debris, grass clippings or plant growth can damage and clog your system, making it run less efficiently. Carefully and gently cleanse the coil from the fins using a clean brush or cloth, being careful not to bend the fins. When you keep your outdoor unit without dirt and debris will boost your AC unit’s efficiency by reducing the resistance. Remember to turn off the thermostat before cleaning your AC system!
3. Clean Indoor Ductwork
A professional should conduct a total cleaning of your ductwork, as it is hidden within your walls and ceilings. You can do some cleaning yourself; you just need to remove the registers, inspect and wipe the duct parts that are visible. Make sure to check the ducts for any water damage or tears, as they can become a bigger issue in the future, and you need to get them fixed.
When your air ducts accumulate moisture due to condensation, this will wreck your system and lead to fungus and mold growth. This problem needs to be addressed immediately by contacting a professional plumber. Don’t try and fix the unit by yourself, as the malfunction could be due to a variety of issues.
4. Maintain and Check the Fan Belts on the Outdoor Unit
The fan belts need to be regularly adjusted or replace if needed. You can purchase these belts at a home improvement or hardware store. It’s important that you make sure you buy the proper replacement parts for your system. These components guarantee that your AC unit runs at peak performance, so they are a vital part in keeping your energy bills lower.
5. Schedule a Pre-Summer Tune-Up by a Professional
Every once in awhile, hire an AC technician to check your AC unit and make sure it’s running properly. A professional will have the know-how and proper tools to fix, upgrade or unclog your unit, keeping it operating at its maximum efficiency. They will also address any problems before they become a larger issue. The expense of having a professional tune-up your system will prolong your unit’s lifespan, making it a great investment.

The post How to Prepare Your AC for the Summer appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/05/31/prepare-ac-summer/
via http://trophy-ac.com

3 Common AC Problems You Can Fix Yourself

When your AC unit is working properly, it easily keeps your home at a comfortable temperature, even when it’s sweltering hot. Therefore, there are few worse things than discovering your AC is not working properly on a hot summer day. It’s best to confront problems before they become an issue, so we outline a few of the most common AC problems, how you can identify them, and how to fix them.

Your AC Won’t Turn On

If you have a central AC unit, the first thing you need to do is check your thermostat and ensure that it’s set to “cool” mode. All external wiring should be inspected to make sure it’s intact, as animals chewing on them can sometimes damage them. Does that all check out? If so, look at the electrical wiring in your home as your next step, as you might have blown a fuse or tripped circuit breaker. Resetting the power in your home can help fix the issue.
If you are still having issues with your AC not turning on after those fixes, you might have a problem faulty internal wiring or a broken motor. In both cases, you should contact an HVAC technician to examine your unit and appropriately correct any issues.

Your AC is Not Cold

If no cold air is coming out of your AC unit, check the thermostat and make sure the proper temperature is set. One trick is to lower the temperature by a few degrees, and if there is no noticeable difference, then the problem might be a clogged condenser or evaporator. Turn off your unit and carefully clean out any noticeable dirt or debris, as the build-up of dust or debris such as weeds, leaves, dirt and pollen prevent the cold air from entering your home. Ensure that the coils and fins of your condenser are clean so the air can flow properly. If this doesn’t fix the issue, then you should contact a professional.
Another possible problem might be that your unit has a refrigerant leak. To check if this is the problem, inspect the set line and look for any damaged areas, and do a visual inspection of the inside and outside connections. If there is a wet spot somewhere, this means that there is a refrigerant leak, which an AC technician must fix.

Your AC Conditioner Fan is Not Working

If the conditioner fan in your AC unit isn’t working, you need to check your electrical system and ensure that no switched off the circuit breaker or tripped wire is causing the problem. Next, check your AC unit for excessive ice buildup, which could be causing the fans coils to freeze. If you notice that is the case, then you need to shut off your unit and contact an HVAC technician.

Your AC Has Mold

Mold in AC units is a common problem, but it’s a serious one, as it can be a detriment to your health. Unfortunately, fixing this is not something that you can DIY, so your best course of action is to contact an HVAC professional. They will have the tools and knowledge to tackle this problem and keep you healthy and happy.

The post 3 Common AC Problems You Can Fix Yourself appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/05/22/3-common-ac-problems-can-fix-2/
via http://trophy-ac.com

4 Things that Can Go Wrong with Your AC

It can be difficult to detect when you are having problems with your heating and air conditioning system (HVAC). Some common problems, if left unattended, can damage your system, increase your utility bills and cause poor indoor air quality. Any time one of the following problem presents itself, make sure to have your HVAC system repaired by a professional, to avoid it breaking down or needing to be replaced.

1. A Dirty AC Filter
The air filter in your HVAC system will eventually become clogged with dirt, dust, mold and other pollutants. When the filter is clogged, your system needs to work harder, expending more energy and reducing its lifespan. A dirty filter also spreads contaminants around your home and the other parts of your HVAC system.
It’s essential to check your filter monthly by holding it up to the light. If no light passes through the filter, it needs to be changed. To keep your HVAC unit working correctly, you must change your air filter every three months and make sure that nothing is blocking your air registers, such as curtains or furniture.

2. Low Refrigerant
The refrigerant in your HVAC unit absorbs outside air heat during the winter, and gives off heat in the summer, warming and cooling your home as needed. If your AC is not cooling your home properly and you notice an increase in your utility bills, the culprit can be low refrigerant caused by poor installation or a leak.
A wet area around the connections of the hose or oily streaks around your compressor are possible signs of a leak. A lot of older HVAC units leak some refrigerant every year, so regularly replacing this refrigerant should be part of its maintenance. If you find that your coolant needs to be recharged more than once per year, an AC technician needs to repair the leak in your unit.

3. Problems With the Thermostat
Your thermostat won’t work properly and get an accurate measure of the temperature of your home if it’s close to your oven, next to a draft or on a warm sunny wall so make sure to avoid these placement areas. The components in your thermostat can also be dirty from dust, causing your AC unit to work overtime and waste energy.

If your thermostat is not working at all, most likely this is due to a wiring issue, or a battery issue if you have a wireless model. Check that your unit is turned on, the batteries are working, and it’s correctly set for the season.

4. Ductwork That’s Leaky or Dirty
Dirt, must, dust and other contaminants will start to accumulate inside your ducts, lowering your HVAC units efficiency. Other things that can lead to lower indoor quality and higher energy bills are gaps, leaks or poorly installed ductwork. Some of the indicators of a leak are whistling, buzzing or flapping wings noises.
To ensure that you have clean ducts, open the air register and wipe the inside with a damp cloth. If any pest droppings, cobwebs, mold or dirt remains in the fabric, then your ductwork needs to be professionally cleaned. An HVAC professional will also register and fix any leaks, so your unit runs at its optimal conditions. Call Trophy AC for any questions with your Air Conditioner

The post 4 Things that Can Go Wrong with Your AC appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/05/17/4-things-can-go-wrong-ac/
via http://trophy-ac.com

The Way Your Air Conditioner Works

Everything you always wanted to know about AC

Are you considering buying a new air conditioner? Or, are you dissatisfied with the operation of your current air conditioner? Are you unsure whether to fix or replace it? Are you concerned about high summer utility bills? If you answered yes to any of these questions, this publication can help. With it, you can learn about various types of air conditioning systems and how to maintain your air conditioner, hire professional air conditioning services, select a new air conditioner, and ensure that your new air conditioner is properly installed.

Understanding Air Conditioners
Many people buy or use air conditioners without understanding their designs, components, and operating principles. Proper sizing, selection, installation, maintenance, and correct use are keys to cost-effective operation and lower overall costs.

How Air Conditioners Work
An Air conditioner employs the same basic operating principle and mechanical components as does your refrigerator. An air conditioner cools your residence or office with a cold indoor coil called the evaporator. The condenser, a hot outdoor coil, releases the collected heat outside. The evaporator and condenser coils are serpentine tubing surrounded by aluminum fins. This tubing is usually made of copper. A pump, called the compressor, moves a heat transfer fluid (or refrigerant) between the evaporator and the condenser. The pump forces the refrigerant through the circuit of tubing and fins in the coils. The liquid refrigerant evaporates in the indoor evaporator coil, pulling heat out of indoor air and thereby cooling the home. The hot refrigerant gas is pumped outdoors into the condenser where it reverts back to a liquid giving up its heat to the air flowing over the condenser’s metal tubing and fins.

Types of Air Conditioners
The basic types of air conditioners are room air conditioners, split-system central air conditioners, and packaged central air conditioners.

Room Air Conditioners
Room air conditioners cool rooms rather than the entire home. If they provide cooling only where they’re needed, room air conditioners are less expensive to operate than central units, even though their efficiency is generally lower than that of central air conditioners.

Smaller room air conditioners (i.e., those drawing less than 7.5 amps of electricity) can be plugged into any 15- or 20-amp, 115-volt household circuit that is not shared with any other major appliances. Larger room air conditioners (i.e., those drawing more than 7.5 amps) need their own dedicated 115-volt circuit. The largest models require a dedicated 230-volt circuit.

Central Air Conditioners
Central air conditioners circulate cool air through a system of supply and return ducts. Supply ducts and registers (i.e., openings in the walls, floors, or ceilings covered by grills) carry cooled air from the air conditioner to the home. This cooled air becomes warmer as it circulates through the home; then it flows back to the central air conditioner through return ducts and registers. A central air conditioner is either a split-system unit or a packaged unit.

In a split-system central air conditioner, an outdoor metal cabinet contains the condenser and compressor, and an indoor cabinet contains the evaporator. In many split-system air conditioners, this indoor cabinet also contains a furnace or the indoor part of a heat pump. The air conditioner’s evaporator coil is installed in the cabinet or main supply duct of this furnace or heat pump. If your home already has a furnace but no air conditioner, a split-system is the most economical central air conditioner to install.

In a packaged central air conditioner, the evaporator, condenser, and compressor are all located in one cabinet, which usually is placed on a roof or on a concrete slab next to the house’s foundation. This type of air conditioner also is used in small commercial buildings. Air supply and return ducts come from indoors through the home’s exterior wall or roof to connect with the packaged air conditioner, which is usually located outdoors. Packaged air conditioners often include electric heating coils or a natural gas furnace. This combination of air conditioner and central heater eliminates the need for a separate furnace indoors.

Maintaining Existing Air Conditioners
Older air conditioners may still be able to offer years of relatively efficient use. However, making your older air conditioner last requires you to perform proper operation and maintenance.

Air Conditioning Problems
One of the most common air conditioning problems is improper operation. If your air conditioner is on, be sure to close your home’s windows and outside doors.

Other common problems with existing air conditioners result from faulty installation, poor service procedures, and inadequate maintenance. Improper installation of your air conditioner can result in leaky ducts and low air flow. Many times, the refrigerant charge (the amount of refrigerant in the system) does not match the manufacturer’s specifications. If proper refrigerant charging is not performed during installation, the performance and efficiency of the unit is impaired. Service technicians often fail to find refrigerant charging problems or even worsen existing problems by adding refrigerant to a system that is already full. Air conditioner manufacturers generally make rugged, high quality products. If your air conditioner fails, it is usually for one of the common reasons listed below:

refrigerant leaks. If your air conditioner is low on refrigerant, either it was undercharged at installation, or it leaks. If it leaks, simply adding refrigerant is not a solution. A trained technician should fix any leak, test the repair, and then charge the system with the correct amount of refrigerant. Remember that the performance and efficiency of your air conditioner is greatest when the refrigerant charge exactly matches the manufacturer’s specification, and is neither undercharged nor overcharged.
inadequate maintenance. If you allow filters and air conditioning coils to become dirty, the air conditioner will not work properly, and the compressor or fans are likely to fail prematurely.
electric control failure. The compressor and fan controls can wear out, especially when the air conditioner turns on and off frequently, as is common when a system is oversized. Because corrosion of wire and terminals is also a problem in many systems, electrical connections and contacts should be checked during a professional service call.
Regular Maintenance
An air conditioner’s filters, coils, and fins require regular maintenance for the unit to function effectively and efficiently throughout its years of service. Neglecting necessary maintenance ensures a steady decline in air conditioning performance while energy use steadily increases.

Air Conditioner Filters
The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters block normal air flow and reduce a system’s efficiency significantly. With normal air flow obstructed, air that bypasses the filter may carry dirt directly into the evaporator coil and impair the coil’s heat-absorbing capacity. Filters are located somewhere along the return duct’s length. Common filter locations are in walls, ceilings, furnaces, or in the air conditioner itself.

Some types of filters are reusable; others must be replaced. They are available in a variety of types and efficiencies. Clean or replace your air conditioning system’s filter or filters every month or two during the cooling season. Filters may need more frequent attention if the air conditioner is in constant use, is subjected to dusty conditions, or you have fur-bearing pets in the house.

Air Conditioner Coils
The air conditioner’s evaporator coil and condenser coil collect dirt over their months and years of service. A clean filter prevents the evaporator coil from soiling quickly. In time, however, the evaporator coil will still collect dirt. This dirt reduces air flow and insulates the coil which reduces its ability to absorb heat. Therefore, your evaporator coil should be checked every year and cleaned as necessary.

Outdoor condenser coils can also become very dirty if the outdoor environment is dusty or if there is foliage nearby. You can easily see the condenser coil and notice if dirt is collecting on its fins.

You should minimize dirt and debris near the condenser unit. Your dryer vents, falling leaves, and lawn mower are all potential sources of dirt and debris. Cleaning the area around the coil, removing any debris, and trimming foliage back at least 2 feet (0.6 meters) allow for adequate air flow around the condenser.

Coil Fins
The aluminum fins on evaporator and condenser coils are easily bent and can block air flow through the coil. Air conditioning wholesalers sell a tool called a “fin comb” that will comb these fins back into nearly original condition.
Sealing and Insulating Air Ducts
An enormous waste of energy occurs when cooled air escapes from supply ducts or when hot attic air leaks into return ducts. Recent studies indicate that 10% to 30% of the conditioned air in an average central air conditioning system escapes from the ducts.

For central air conditioning to be efficient, ducts must be airtight. Hiring a competent professional service technician to detect and correct duct leaks is a good investment, since leaky ducts may be difficult to find without experience and test equipment. Ducts must be sealed with duct “mastic.” The old standby of duct tape is ineffective for sealing ducts.

Obstructions can impair the efficiency of a duct system almost as much as leaks. You should be careful not to obstruct the flow of air from supply or return registers with furniture, drapes, or tightly fitted interior doors. Dirty filters and clogged evaporator coils can also be major obstructions to air flow.

The large temperature difference between attics and ducts makes heat conduction through ducts almost as big a problem as air leakage and obstructions. Ducts in attics should be insulated heavily in addition to being made airtight.

Buying New Air Conditioners
Today’s best air conditioners use 30% to 50% less energy to produce the same amount of cooling as air conditioners made in the mid 1970s. Even if your air conditioner is only 10 years old, you may save 20% to 40% of your cooling energy costs by replacing it with a newer, more efficient model.

Sizing Air Conditioners
Air conditioners are rated by the number of British Thermal Units (Btu) of heat they can remove per hour. Another common rating term for air conditioning size is the “ton,” which is 12,000 Btu per hour.

How big should your air conditioner be? The size of an air conditioner depends on:
how large your home is and how many windows it has;
how much shade is on your home’s windows, walls, and roof;
how much insulation is in your home’s ceiling and walls;
how much air leaks into your home from the outside; and
how much heat the occupants and appliances in your home generate.

An air conditioner’s efficiency, performance, durability, and initial cost depend on matching its size to the above factors.

Make sure you buy the correct size of air conditioner. Two groupsthe Air Conditioning Contractors of America (ACCA) and the American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE)publish calculation procedures for sizing central air conditioners. Reputable air conditioning contractors will use one of these procedures, often performed with the aid of a computer, to size your new central air conditioner.

Be aware that a large air conditioner will not provide the best cooling. Buying an oversized air conditioner penalizes you in the following ways.

It costs more to buy a larger air conditioner than you need.

The larger-than-necessary air conditioner cycles on and off more frequently, reducing its efficiency. Frequent cycling makes indoor temperatures fluctuate more and results in a less comfortable environment. Frequent cycling also inhibits moisture removal. In humid climates, removing moisture is essential for acceptable comfort. In addition, this cycling wears out the compressor and electrical parts more rapidly.

A larger air conditioner uses more electricity and creates added demands on electrical generation and delivery systems.

Air Conditioner Efficiency
Each air conditioner has an energy-efficiency rating that lists how many Btu per hour are removed for each watt of power it draws. For room air conditioners, this efficiency rating is the Energy Efficiency Ratio, or EER. For central air conditioners, it is the Seasonal Energy Efficiency Ratio, or SEER. These ratings are posted on an Energy Guide Label, which must be conspicuously attached to all new air conditioners. Many air conditioner manufacturers are participants in the voluntary EnergyStar® labeling program (see Source List in this publication). EnergyStar-labeled appliances mean that they have high EER and SEER ratings.

In general, new air conditioners with higher EERs or SEERs sport higher price tags. However, the higher initial cost of an energy-efficient model will be repaid to you several times during its life span. Your utility company may encourage the purchase of a more efficient air conditioner by rebating some or all of the price difference. Buy the most efficient air conditioner you can afford, especially if you use (or think you will use) an air conditioner frequently and/or if your electricity rates are high.

Room Air ConditionersEER
Room air conditioners generally range from 5,500 Btu per hour to 14,000 Btu per hour. National appliance standards require room air conditioners built after January 1, 1990, to have an EER of 8.0 or greater. Select a room air conditioner with an EER of at least 9.0 if you live in a mild climate. If you live in a hot climate, select one with an EER over 10.

The Association of Home Appliance Manufacturers reports that the average EER of room air conditioners rose 47% from 1972 to 1991. If you own a 1970s-vintage room air conditioner with an EER of 5 and you replace it with a new one with an EER of 10, you will cut your air conditioning energy costs in half.

Central Air ConditionersSEER
National minimum standards for central air conditioners require a SEER of 9.7 and 10.0, for single-package and split-systems, respectively. But you do not need to settle for the minimum standardthere is a wide selection of units with SEERs reaching nearly 17.

Before 1979, the SEERs of central air conditioners ranged from 4.5 to 8.0. Replacing a 1970s-era central air conditioner with a SEER of 6 with a new unit having a SEER of 12 will cut your air conditioning costs in half.

Hiring Professional Service
When your air conditioner needs more than the regular maintenance described previously, hire a professional service technician. A well-trained technician will find and fix problems in your air conditioning system. However, not all service technicians are competent. Incompetent service technicians forsake proper diagnosis and perform only minimal stop-gap measures. Insist that the technician:

check for correct amount of refrigerant;
test for refrigerant leaks using a leak detector;
capture any refrigerant that must be evacuated from the system, instead of illegally releasing it to the atmosphere;
check for and seal duct leakage in central systems;
measure air flow through the evaporator coil;
verify the correct electric control sequence and make sure that the heating system and cooling system cannot operate simultaneously;
inspect electric terminals, clean and tighten connections, and apply a non-conductive coating if necessary;
oil motors and check belts for tightness and wear;
check the accuracy of the thermostat.
Choosing a Contractor
Choosing a contractor may be the most important and difficult task in buying a new central air conditioning system. Ask prospective contractors for recent references. If you are replacing your central air conditioner, tell your contractor what you liked and did not like about the old system. If the system failed, ask the contractor to find out why. The best time to fix existing problems is when a new system is being installed.

When designing your new air conditioning system, the contractor you choose should:

use a computer program or written calculation procedure to size the air conditioner;
provide a written contract listing the main points of your installation that includes the results of the cooling load calculation;
give you a written warranty on equipment and workmanship;
allow you to hold the final payment until you are satisfied with the new system.
Avoid making your decision solely on the basis of price. The quality of the installation should be your highest priority, because quality will determine energy cost, comfort, and durability.

Installation and Location of Air Conditioners
If your air conditioner is installed correctly, or if major installation problems are found and fixed, it will perform efficiently for years with only minor routine maintenance. However, many air conditioners are not installed correctly. As an unfortunate result, modern energy-efficient air conditioners can perform almost as poorly as older inefficient models.

Be sure that your contractor performs the following procedures when installing a new central air conditioning system:

allows adequate indoor space for the installation, maintenance, and repair of the new system, and installs an access door in the furnace or duct to provide a way to clean the evaporator coil.
uses a duct-sizing methodology such as the Air Conditioning Contractors of America (ACCA) Manual D.
ensures there are enough supply registers to deliver cool air and enough return air registers to carry warm house air back to the air conditioner.
installs duct work within the conditioned space, not in the attic, wherever possible.
seals all ducts with duct mastic and heavily insulates attic ducts.
locates the condensing unit where its noise will not keep you or your neighbors awake at night, if possible.
places the condensing unit in a shady spot, if possible, which can reduce your air conditioning costs by 1% to 2%.
verifies that the newly installed air conditioner has the exact refrigerant charge and air flow rate specified by the manufacturer.
locates the thermostat away from heat sources, such as windows, or supply registers.
If you are replacing an older or failed split system, be sure that the evaporator coil is replaced with a new one that exactly matches the condenser coil in the new condensing unit. (The air conditioner’s efficiency will likely not improve if the existing evaporator coil is left in place; in fact, the old coil could cause the new compressor to fail prematurely.)

If you install a new room air conditioner, try to:

locate the air conditioner in a window or wall area near the center of the room and on the shadiest side of the house.
minimize air leakage by fitting the room air conditioner snugly into its opening and sealing gaps with a foam weatherstripping material.
Paying attention to your air conditioning system saves you money and reduces environmental pollution. Notice whether your existing system is running properly, and maintain it regularly. Or, if you need to purchase a new air conditioner, be sure it is sized and installed correctly and has a good EER or SEER rating.

The post The Way Your Air Conditioner Works appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/05/11/the-way-your-air-conditioner-works/
via http://trophy-ac.com

5 Signs Your AC is Failing

For many of our clients, this isn’t an uncommon situation: it’s the hottest day of the year and you head on over to your AC system only to find it’s broken. Ouch. This can often be avoided, as long as you pick up the warning signs before it’s too late. The following are five most common symptoms that may point to your AC being on the verge of failure.

1. Higher Energy Bills
When an AC unit is wearing out, it must run for a longer period to cool down the temperature. This leads to you receiving higher and higher energy bills, so it’s important that you get it checked out as quickly as possible. It’s best that you replace the filter and clean the coils when the AC starts slowing down, as it will make a big difference. Therefore, if you notice a higher energy bill, along with a less efficient cooling of your house, the most likely culprit is a failing AC unit.

2. No Cold Air Coming From the Vents
Are you not receiving as much cold air as you remember from your vents? If it is not cold at all, or your vents are pumping out warm air, this means that your AC isn’t working properly anymore and needs to be repaired. There are several fixes to this problem, some as simple as refilling the refrigerant or more extensive repairs.

3. Weak Airflow From Your Vents
If not much air is coming through the vents, this means that your AC unit’s compressor is possibly failing, or that your air conditioner ducts need a cleaning. Debris, dust and pet hair build up in your vents over time, weakening the air flow and reducing the air quality in your home.

4. Strange Noises
Your AC unit is manufactured to run as quietly as possible. If you hear strange sounds coming out of your unit, such as a grating, squealing or grinding sound, this is a definite sign that your AC needs repair. A hissing noise could mean that you have leaky ducts that are disrupting the airflow in your system and cause freezing of the indoor evaporator. Buzzing might mean that the problem is electrical, which puts both your AC unit and your home at risk of a fire. Any banging sounds usually mean that there is something loose inside the unit.
If you hear any noise coming out of your AC, you need to call a technician. Any sounds indicate that there is something wrong with your unit and if you do not address this issue, your unit will break down and lead to more serious repairs in the future.

5. Moisture Where None Should be Present
Do you have any pools of water around your AC unit? This possibly means that you have a blocked or broken drain tube, which disposes of the condensation. It’s important that you repair this, as the moisture and water can lead to mold growth.
Have a lot of water dripping inside your AC unit? That means trouble. If your drip pan is full, this might mean that you have melted ice inside your unit, which can severely damage it. Another bit problem is the sound of ice chunks falling. If you notice excess moisture or hear the sound of ice falling, then shut off the unit and contact a technician as quickly as possible.
Call Trophy AC for any questions, please

The post 5 Signs Your AC is Failing appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/05/01/5-signs-ac-failing/
via http://trophy-ac.com

Air Conditioning Services in San Antonio

Proper Air Conditioning Maintenance For Maximum Efficiency

You would not want to destroy the warranty of your newly-purchased air conditioning unit, right? Then, never attempt to repair it yourself once you suspect a problem. The soonest that you detect anything erroneous with your system, pick up the phone, call Trophy AC air conditioning Repair, Service and Installation company and stay calm. Let the expert residential and commercial HVAC contractor handle the trouble and correct the errors in your central air conditioning system. The idea of DIY (do-it-yourself) is for those simple home appliances, while professional maintenance is what is needed when it comes to indoor comfort systems. Turn to Trophy AC air conditioning Repair, Service and Installation company because we will gladly take care of your heating and cooling needs.

Help Ensure Top A/C Efficiency By Cleaning Or Replacing The Filter Monthly

To keep your unit running effectively, make it a point to ascertain that the filters, which protect the indoor air that circulates in your house, are properly maintained regularly. Once dust builds up on your filter, the chances of your air conditioning unit to work smoothly are diminished. When the airflow is blocked with these mini particles, your unit will eat up a lot of energy because it will be commissioned to work harder. Never let this unlikely incident to occur. Surely, you would not want your comfort system to give you head aches through eye-popping electric bills. Make it a habit to clean and replace your filters as often as needed. Rule of thumb: The longer the air conditioning unit is running, the sooner it will need cleaning. So if it’s summer, naturally, you will have to clean and/or change your filters more frequent. Remember to turn the air conditioning unit off while removing air filters. To learn more about indoor air quality, please visit: US Environmental Protection Agency.

Efficiency Air Conditioning Can Be Obtained By Keeping Outdoor Unit Clear Of Debris, Leaves And Shrubbery

Not because your air conditioner looks neat on the inside it does not mean that it can do away without inspection or cleaning. Remember, not everything is installed inside. A part of it is left outside the house, which means that you need to check once in a while whether the outdoor unit, too, is accumulating unwanted dirt. One important thing to note are the trees that sit beside it. Fallen leaves may hinder the efficiency of the air conditioning unit so make it a habit to clear your air conditioning units with fallen shrubs.

Keep Your Air Conditioning System Looking New For Years

Keeping your air conditioner clean is easy. In fact, soap plus water will do the trick for grease and stains on your unit’s enamel finish. However, for tougher dirt particles and bigger concerns, you must call a reliable air conditioning service like Houston, Austin, Dallas and San Antonio air conditioning Repair, Service and Installation company to handle the problem. Contact us for routine check-ups, heating, cooling and air conditioning repair. Routine check-ups are significant to ensure your unit’s smooth service for long years. An HVAC expert should be left with the dirty job. Call Houston, Austin, Dallas and San Antonio air conditioning Repair, Service and Installation company, the most trusted HVAC contractor in Houston Dallas, Austin and San Antonio for Commercial and residential projects, at least once every year to check on your unit for possible problems and inefficiency. The professional service is helpful for:

Routine inspection for air filter(s); cleaning or replacement as required.
Inspection as well as cleaning of the blower wheel and housing, as well as motor as needed.
Inspection or, if necessary, cleaning both of outdoor and indoor coils.
Inspection particularly of the drain pan of indoor coil, as well as the primary and secondary drain lines.
Check-up of the electrical connections and wiring.
Security of physical connections of particular individual components within the units.
Operational check-up for the air conditioning system to exactly determine actual operating condition.

CAUTION: Condensate drains should be checked and cleaned periodically. If it cannot drain freely, water damage must be treated.

WARNING: Improper installation, adjustment, alteration, service, maintenance, or use of indoor comfort systems can cause explosion, fire, electrical shock, or other conditions that are threat to people and property.
Contact Arya Air Conditioning and Heating in Houston immediately for proper information and/or assistance. A/C repair professionals use factory-authorized kits and accessories when modifying HVAC products.

How To Operate Your System For Peak Performance
If the idea of air conditioning unit is still new to you, you need not to worry. Here’s a helpful guide to appropriately operate your comfort system that’s as easy as 1-2-3. If you encounter any problems, however, Trophy AC air conditioning Repair, Service and Installation company will be glad to aid you in your need.

To set the temperature, make it a point to place the air conditioning system switch to COOL, while the fan to AUTO. You may then set your desired temperature on thermostat control. Once the system reach the indoor temperature goal, it will automatically shut off.
The same setting applies come winter, only, you will have to switch it on HEAT. Whenever the indoor temperature drops below what was previously set, the system will run and shuts off when the desired or particular temperature is reached.

Save Energy With An Electronic Programmable Thermostat
Thermostats are created to provide you with the temperature that suits your comfort level. Trane air conditioning units are equipped with a program that covers four setup periods excluding the weekend and the vacation programs.

Let The Air Conditioning Thermostat Do Its Job

The thermostat is one of the most significant component of an air conditioning unit. It provides unparalleled efficiency in temperature control. You will never have to turn your system on and off repeatedly once you are able to set desired temperatures. Leave the job to the thermostat and it will gladly provide you with effective results. Be sure not to abuse the component, though. Make up your mind first on your desired temperature (the rule is to keep future adjustments to a minimum so you can be assured of a longer service), set it up and presto! Your unit will run and shut off to meet your comfort level. A recommended temperature setting of 78 degrees F for cooling and 68 degrees F for heating shall guide you for excellent control. However, you may set the room temperature depending on how you preferred it to be. Just make it a point to ascertain that you are not getting your air conditioner overwork. Run it only when necessary so you can enjoy its efficient service for years to come.

Never Stop The Air Conditioning System By Shutting Off The Main Power
To maintain your air conditioning system in fighting form, always take caution when using it. Whenever power interruptions occur, be sure that you are able to turn off the thermostat, never letting it sit for over three hours. Turn the thermostat on as soon as the electricity is restored. Failure to do so may severely damage your unit so beware.

CAUTION: If heating system is not working during the winter, provisions MUST be taken to prevent water pipes from freezing-up.

How To Reduce Summer Humidity
When dealing with the crazy summer heat, your air conditioner is commissioned to perform other tasks like removing excess moisture rather than just cooling the air. This, in turn, push the system work harder, thus, using up a lot of energy. That is what the exhaust fans are for. Make sure one is easily accessible in your kitchen and in the bathrooms as well to help control moisture. So your air conditioning system is left with just a single task to cool the air.

Extra Energy-Saving Tips

Insulation
To conserve energy, insulation is your key. Remember to keep your home properly insulated. Thermal resistance or the R-values should be your basis when installing thermal insulation. R-30 (10″) is particularly suitable for ceilings, while R-11 (3-1/2) is best suited for exterior walls as well as floors on unheated areas. During winter, consider adding insulation for your air conditioning unit.
The infiltration of the outdoor air is your air conditioning system’s biggest enemy. Not only does it push your unit to work better but also requires it to use up more energy — from 15 to 30%! Find holes and patches in your house where air can invade and fill it up with plastics or weather strips so that your heating and/or cooling system will not be overworked. Specifically, take note of air passages on doors and windows.
Remember to keep all doors as well as windows closed at all times.
Installation of storm doors in all the entrances is a big help.
To better secure your windows from outside air, use double glazed windows and low-e glass. An extra layer of glass will considerably cut the transfer of heat from the outside.
Always check that fireplaces are facilitated with tight-fitting dampers that can be easily closed whenever the fireplace is never utilized.
To conserve energy during the cold months, have a humidifier installed. This will keep the air inside not as dry, keeping you comfortable even at a lower temperature setting.

Heating

Place the thermostat away from doors as well as windows.
Set the thermostat in low setting without sacrificing comfort.
When anticipating a large group of people into your home, put the thermostat in low setting because the big crowd has direct effects on the indoor temperature.

Cooling

Set the thermostat high, in a temperature setting that you feel most comfortable.
Remember to keep good ventilation in the attic so as not to buildup heat. Add vents or exhaust fans, if necessary.
When building new home or renovating the old one, select light-colored roof shingles so as to reflect the sun’s heat.
Use your air conditioning unit only when needed.
Put up blinds or drapes to caulk sunlight when it is hottest.
During winter, never run the exhaust fans in your kitchen or bathrooms unless necessary.
Never put lamps, TV sets and other heat-generating gadget beneath a wall-mounted thermostat. Rising heat from these appliances may trigger your conditioning system to overwork.
If you experience any problems with your systems, an air conditioning and heating service, repair and maintenance technician is on standby seven days a week. Trophy AC air conditioning Repair, Service and Installation company operates even during Holidays so you can be sure of excellent installation, maintenance, and repair of your air conditioning unit whenever you need one.

What Is UV Light?

U/V lamps are aided to control the growth of mold and algae in covered spaces. It was first utilized in big establishments and buildings as required by the U.S. Government. Now, the same comfort can be enjoyed by homeowners everywhere. Trophy AC air conditioning Repair, Service and Installation company, the leading HVAC contractor in Houston, Sugerland, Katy & missouri City, has launched UV Germicidal Lamp, which is apt for home and office environments. It is being installed beside the HVAC unit preventing the growth of mold and mildew on your air conditioning system’s coils. It features excellent protection against many kinds of biological contaminants like bacteria, viruses, spores, dust mites, and algae keeping your home and/or office safe from airborne allergens. It also helps reduce odor by effectively treating the air/furnace using UV sterilization day in and day out. Some of the unit’s notable features include:

Allergy/Asthma relief
Pennies/day to operate
Produces no Ozone!
Specifications: – One – 13 watt UV-C lamp
Bulb has a lifespan of 12000 hours
120 volt, with power cord

Why HVAC Contractors Recover Refrigerants (Freon)?
More than thirty years ago, a hole in the ozone layer has been found. That hole shown direct links to the use of chlorofluorocarbons (CFCs) worldwide. As you may know by now, the hole in the ozone layer that is getting bigger each day is a major threat to people all over the world because this would mean infiltration of the harmful ultraviolet rays. The UV rays cause skin cancer and cataract outbreaks. In fact, a dramatic rise of skin and eye disease cases have already been recorded in the southern tip region of Chile along with certain auto-immune disorders. Their farms are also suffering, dealing with poor crops and short lifespan for livestock. Next to Chile, every one worldwide should take precautions because there is no way we can prevent the widespread of these problems if we will not control the emission of CFC that, sadly, is a major component of things that we use regularly like hair sprays. Even air conditioning and refrigeration units are guilty of these charge. Good thing, we at the HVAC industry are acting fast now. In a couple of years, we are able to diminish, if not completely eliminate, the use of CFCs by recovering Freon rather than venting the gas. It was pricey both on our part and on the part of our consumers but hey, it’s the most sane thing to do. It’s stipulated in the revised Clean Air Act, after all.
Call Trophy AC with all your AC Repair and Service needs

The post Air Conditioning Services in San Antonio appeared first on Trophy AC.

from Trophy AC http://trophy-ac.com/2017/04/28/air-conditioning-services-san-antonio/
via http://trophy-ac.com